Flash Modules are items that require occasional replacement. You may need to replace the flash device on your GC2 if your device is not recognizing shots (displaying dashes) or displaying inconsistent readings.
-
Remove device from any protective enclosure and place on a level floor with the foot/latch properly set to assure correct operation.
-
Before attempting to diagnose the flash module, confirm that your device has not been subjected to static shock by holding down the power button for 6 seconds (until the device powers off) and restarting the device again.
- Place the GC2 on the same level hitting surface as the ball. Confirm that the device recognizes the ball when placed in the hitting zone (as indicated by a solid green light). Proceed with hitting the ball.
> If the device displays DASHED READINGS, the device is working but the flash needs to be replaced. Please replace the flash as instructed in the GC2 Unser Manual.
> If the device DOES NOT RECOGNIZE BALL, consult the section titled “GC2 Device not recognizing the ball/inconstant reading”.
-
If after consulting both of these troubleshooting steps the GC2 still does not respond to shots, please contact Foresight Sports technical support.