The GCQuad handle, when placed under a specific force or pressure may allow the security tabs to pop out of place.
This is easily resolvable by loosening the HEX screws that hold the handle in place, removing and then re-placing the handle into place once more with the tabs contained within the housing of the GCQuad.
To perform this function, please see the instructions below:
1. Loosen the 2 HEX Screws from the back of the GCQuad Handle
2. Pull Back the Handle From the housing.
3. Place the Handle Back Into the Housing, With the Security Tabs now enclosed by the Back Housing of the GCQuad.
4. Tighten the 2 Hex Screws Back to Snug and Secure. Be Sure Not To Overtighten. This will damage the handle and the housing of the GCQuad which is not covered by the product warranty.