This product has been tested and certified to meet regulatory requirements for safety, electromagnetic compatibility (EMC), and radio equipment in the regions where it is marketed.
UNITED STATES
| Electrical Safety | UL 62368-1, 4th Edition (2025) based on IEC 62368-1:2023; 3rd Edition (2019) accepted during transition |
| EMC | FCC 47 CFR Part 15, Subpart B — Unintentional Radiators (Verification) |
| RF Exposure | FCC KDB 447498 — mobile exposure conditions; minimum separation distance 20 cm |
| Radio Certification | Contains FCC ID: 2A6QA-JODYW263FSS The FCC ID is printed on the regulatory label on the bottom of the GC2 and can also be viewed in the Foresight App under Device → About. |
| Regulatory Statement | This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure: This equipment complies with FCC radiation exposure limits. The antenna used by this device must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
CANADA
| Electrical Safety | CSA C22.2 No. 62368-1:25, 4th Edition — enforced from 30 April 2026 |
| EMC | ICES-003 Issue 7 |
| Radio | RSS-247 Issue 2 (February 2017); RSS-Gen |
| RF Exposure | RSS-102 — uncontrolled environment; minimum separation distance 20 cm |
| Radio Certification | Contains IC: 28505-JODYW263FSS |
| Regulatory Statement | This device complies with Innovation, Science and Economic Development Canada (ISED) licence-exempt RSS standard(s). Operation is subject to: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Operation in the band 5150–5250 MHz is for indoor use only. Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition de rayonnement d'ISED RSS-102 déterminées pour un environnement non contrôlé. Cet équipement devrait être installé et actionné avec la distance minimum 20 cm entre le radiateur et votre corps. Le dispositif de fonctionnement dans la bande 5150-5250 MHz est réservé à une utilisation en intérieur. |
EUROPEAN UNION
| Electrical Safety | EN 62368-1:2014 + A11:2017 — 2nd Edition, cited in the Official Journal for the Low Voltage Directive |
| EMC | EN 55032:2015 + A11:2020 (emissions); EN 55035:2017 + A11:2020 (immunity) EN 61000-3-2:2014; EN 61000-3-3:2013 (harmonics and flicker) |
| Radio | EN 300 328 V2.2.2; EN 301 893 V2.1.1; EN 300 440 V2.1.1 (RED Art. 3.2) |
| Radio EMC | EN 301 489-1 V2.2.3; EN 301 489-17 V3.2.4 (RED Art. 3.1b) |
| RF Exposure | EN 62311:2008 (Wi-Fi); EN 62479:2010 (Bluetooth / BLE) (RED Art. 3.1a) MPE assessed for worst-case simultaneous transmission at a 20 cm evaluation distance against ICNIRP 1998 reference levels |
UNITED KINGDOM
| Electrical Safety | BS EN 62368-1:2014 + A11:2017 — designated standard under the Electrical Equipment (Safety) Regulations 2016 |
| EMC | BS EN 55032:2015 + A11:2020 (emissions); BS EN 55035:2017 + A11:2020 (immunity) BS EN 61000-3-2:2014; BS EN 61000-3-3:2013 (harmonics and flicker) |
| Radio | BS EN 300 328 V2.2.2; BS EN 301 893 V2.1.1; BS EN 300 440 V2.1.1 — Radio Equipment Regulations 2017 |
| Radio EMC | BS EN 301 489-1 V2.2.3; BS EN 301 489-17 V3.2.4 |
| RF Exposure | BS EN 62311:2008 |
| Marking | CE marking is recognized indefinitely in Great Britain for radio equipment; UKCA marking is optional. In Northern Ireland, CE marking applies. |
JAPAN
| Electrical Safety | J62368-1 (2023) — based on IEC 62368-1, 3rd Edition |
| EMC | VCCI-CISPR 32:2016 — Class B |
| Radio | Radio Law, Article 2-1-19 (2.4 GHz) and Article 2-1-19-3 (5 GHz) |
| Radio Certification | Giteki 003-210312 — Radio Law, Article 38-24 (DSP Research, Inc.) |
| Telecom Certification | D210214003 — Telecommunications Business Law, Article 9 (DSP Research, Inc.) |
| Regulatory Statement | Operation in the 5150–5350 MHz band is restricted to indoor use. |
AUSTRALIA / NEW ZEALAND
| Electrical Safety | AS/NZS 62368.1:2022 — based on IEC 62368-1, 3rd Edition |
| EMC | AS/NZS CISPR 32:2015 + A1:2020 |
| Radio | AS/NZS 4268:2012 + AMDT 1:2013 — Radio equipment and systems: Short range devices |
| Regulatory Statement | This product bears the RCM (Regulatory Compliance Mark). Compliance is declared by the responsible supplier under a Supplier's Declaration of Conformity supported by a compliance folder held for the product. |
KOREA
| Electrical Safety | KC 62368-1 [TBD — confirm accepted edition with certification body] |
| EMC | KS C 9832:2024 (emissions); KS C 9835:2019 (immunity) |
| Radio EMC | KS X 3124:2020; KS X 3125:2020; KS X 3126:2020 |
| Radio Certification | Contains a module certified under KC R-C-ULX-JODY-W263-01A (National Radio Research Agency, 22 September 2022) |
| Regulatory Statement | Korean Class A Warning Statement (For Business Use Equipment) The following statement is required for products approved for use in Korea under Class A (business/industrial environment): 주의사항 A급 기기(업무용 방송통신기자재) 이 기기는 업무용 환경에서 사용할 목적으로 적합성 평가를 받은 기기로서 가정용 환경에서 사용하는 경우 전파 간섭의 우려가 있습니다. Model Name: GC2100 (GC2) |
TAIWAN
| Electrical Safety | Exempt from mandatory BSMI commodity inspection — BSMI exemption obtained |
| EMC | Exempt from mandatory BSMI commodity inspection — BSMI exemption obtained |
| Radio | LP0002 (2020), clauses 4.10.1 and 5.7 — Regulations Governing Low-power Radio-frequency Devices |
| RF Exposure | MPE limit 1 mW/cm² — measured 0.072 mW/cm² (2.4 GHz) and 0.099 mW/cm² (5 GHz); minimum separation distance 20 cm |
| Radio Certification | Contains a module type-approved under certification label CCAJ22Y100F1T2 (Telecom Technology Center, re-issued 28 April 2023) |
| Regulatory Statement | 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 |
ADDITIONAL REGIONS
China — The GC2 falls outside the scope of mandatory CCC certification; a CCC exemption opinion has been obtained.
Certification for Singapore, Thailand, and other international markets is pending. All regional certifications will be completed prior to international launch (December 2026).
11 SPECIFICATIONS