Foresight Premier supports multiple displays, up to four in total, including dual display options, and above. Before setting them up in Premier, your displays must be configured independently in Windows.
Before You Start: Set Windows to Extend
Premier requires each display to be treated as its own screen. If Windows is duplicating your displays, every screen shows the same image and Premier cannot address them separately.
- Press Windows + P to open the display switcher.
- Select Extend.
Alternatively, go to Settings > System > Display, and under Multiple displays, select Extend these displays.
Adding a Monitor in Premier
- From the Premier main menu, select General Settings at the top of the screen.
- Select Display & Performance.
- Select Add Monitor.
- Choose your display from the dropdown. This lists the displays currently connected to your computer.
- Set the Screen Resolution for that display. Available resolutions depend on your graphics card and the display itself.
- Set the Display Mode — Full Screen or Windowed.
Removing a Monitor
- Select the X in the corner of that monitor's panel to remove it from your Premier configuration.
Note:
Premier supports up to four displays, each with its own resolution and display mode. Selecting what appears on each individual display is not available at this time.
Related Articles: