If you are having a problem finding the GC3 Wifi signal on your PC/iPad please use the following steps to switch from the local Wifi network connection to the GC3 Wifi signal:
- Locate the Wifi connection window on the GC3
- Setting > Wifi > Disconnect from the local network Wifi signal
- Power cycle the GC3 by holding down the power button for 15 seconds (the device will turn off)
- Restart your PC/iPad
- You should see the GC3###### show up in the Wifi list (this may take a minute)
- Connect to the GC3 using the password FSSPORTS
- The GC3 will populate in the device list of FSX 2020/FSX Pro
Please use the following instructions if you want to switch back to the local network Wifi connection with the GC3:
- Powercycle the GC3 by holding down the power button for 15 seconds
- Locate the Wifi connection window on the GC3
- Settings > Wifi > Connect to the local network Wifi signal (this may take a minute)
- 'Forget' the GC3###### Wifi on your PC/iPad
- Restart the PC/iPad
- Connect to the same Wifi signal that the GC3 is connected to
- You will see the GC3 populate in the device list of FSX 2020/FSX Pro