Confirm that the computer is properly connected to the monitor and/or projector. Foresight Sports recommends using the same connection-type (such as DVI) if connecting to two monitors or a projector.
-
Once you've confirmed that the monitor and/or projector is properly connected, right-click on the computer desktop and select SCREEN RESOLUTION.
-
If the monitor and/or projector is powered on, it will show as a select-able screen to display the image. If the monitor/projector is not seen here, click “detect” in the upper right near the image of the screens. This will allow the computer to recognize the screen.
-
If not detected, please contact your computer manufacturer.
-
Once the monitor and/or projector has been detected, start the FR1 software.
-
Go to the OPTIONS menu and enter the password “fss01011”.
-
Go to SCREEN SETTINGS and set the resolution for the monitor you are using to match the resolution set on your computer. Confirm that the game is presenting to the correct screen (select from the available monitors seen in the screen settings menu). This will allow the simulation software to run correctly.
If you receive an error message, please refer to the “projector or monitor error messages” area in this section.